European Travel SIM | Data Only | Support 50 Countries

• Step 1 : Make sure your device UNLOCKED
• Step 2 : Read your device user manual to find APN setting
• Step 3 : Fill in APN plus
• Step 4: And restart your device

Phone Settings=>Cellular=>Cellular Data=>Cellular Data Network=>enter the APN information=>Enable Data Roaming

• APN:plus
• Username and password do not need to be entered

Go to YouTube Video Tutorial

Phone Settings=>Mobile Network=>Select the card name=>Turn on Data Roaming=>Access Point Name(APN)=>New APN=>Enter the APN information

• APN:plus
• Username and password do not need to be entered

Go to YouTube Video Tutorial

Method 1：Insert the card into the phone, configure the APN of the card, and then insert the card into the camera.

Method 2：=>Power on the camera Press the "Reset" button for 5-10 seconds. After you hear the device say “system reset” Insert the card in the correct direction.

=>Enter the device's APPClick “Add a device” Then Click “Setup 4G Device”

=>Click “Blue light isn't constantly on? Click here” Click “Setup APN”

=>Click “Setup APN” Enter “unet” Click “OK”

=>After configuring the APN If the camera has not detected the card, you can let the device scan the QR code. If the card is detected the card, you can click“ Next”

• APN:plus
• Username and password do not need to be entered

Go to YouTube Video Tutorial

①Insert the SIM Card​​
Properly insert the SIM card into the WiFi hotspot device's SIM slot.

②Access the Hotspot Admin Panel​​
Connect your phone/computer to the hotspot's WiFi network.
Open a browser and enter the hotspot’s admin address (e.g., http://192.168.0.1 or refer to the device manual).

③Log In to the Admin Panel​​
Enter the administrator username and password (default credentials are usually on the device label or manual).

④Configure APN​​
Navigate to ​​"Mobile Network"​​ or ​​"APN Settings"​​.
Manually add or modify the APN 
Fill in APN: plus
Username and password do not need to be entered

⑤Enable Data Roaming​​
On the same page, find the ​​"Data Roaming"​​ or ​​"Roaming"​​ option and toggle it ​​"ON"​​.

⑥Save and Restart​​
Save the settings and restart the hotspot device. Wait for the signal light to stabilize (~1-2 minutes).

⑦Test the Connection​​
Reconnect to the hotspot’s WiFi and try browsing or using data to confirm activation.

• APN:plus
• Username and password do not need to be entered

Go to YouTube Video Tutorial

Phone Settings=>Cellular=>Cellular Data=>Cellular Data Network=>enter the APN information=>Enable Data Roaming

• APN:plus
• Username and password do not need to be entered

Go to YouTube Video Tutorial